If your zipper slider has come off the zipper teeth, or if the zipper teeth have become separated, don’t worry – there is a fix! In this blog post, we will discuss two methods for repairing a broken or separated zipper: using a graphite pencil, and using pliers. We will also provide step-by-step instructions on how to complete these repairs. So don’t despair – your favorite piece of clothing can be saved!
How to put Back on a Zipper Back
If your zipper slider has come off the zipper teeth, the first step is to try and reattach it. If the slider is still in good condition, you may be able to simply slip it back onto the teeth. If the slider is damaged, you can purchase a replacement at a local fabric or craft store. Once you have a new slider, simply thread it onto the teeth in the same way that the old one was attached.
If the zipper teeth have become separated, you will need to use a Graphite pencil to realign them. First, open up the garment so that you can access both sides of the zipper. Then, take your graphite pencil and rub it along the length of the zipper teeth on both sides.
This will help to lubricate the teeth and make it easier for them to slide past each other. Next, try opening and closing the zipper a few times to see if the graphite has helped realign the teeth. If not, you may need to repeat this step a few times until the teeth stay aligned.
If your zipper slider is still not staying on the teeth or if the zipper teeth are still becoming separated, you may need to use pliers to realign them.
First, open up the garment so that you can access both sides of the zipper. Then, take a pair of needle-nose pliers and gently bend each tooth back into place.
You may need to do this a few times on each side before the teeth stay aligned. Finally, try opening and closing the zipper a few times to make sure that the pliers have done their job.
You can use Wax – This will help to lubricate the teeth and make it easier for them to slide past each other. Next, try opening and closing the zipper a few times to see if the graphite has helped realign the teeth. If not, you may need to repeat this step a few times until the teeth stay aligned.
Use Petroleum jelly to lubricate the zipper. Open up the garment and access both sides of the zipper. Apply petroleum jelly to the teeth on both sides. Try opening and closing the zipper a few times to see if this has helped. If not, you may need to repeat this step a few times until the teeth stay in place.
Check if your zipper is missing teeth
If your Zipper is missing teeth you will have to completely remove the old zipper and replace it with a new one. Here are the steps:
Cut off the old zipper leaving about an inch or two of extra fabric on either side
Unpick the seam that was holding the old zipper in place
Measure the distance between the two edges of fabric and cut a new zipper to fit that length
(If you’re not sure how to do this, consult a tailor or someone who knows how to sew)
Sew the new zipper into place using a strong thread and needle