How Often Should i Oil my Sewing Machine?

How often you should oil your sewing machine, and where you oil it, depends on how often you use your machine and what type of fabric you sew. In general, however, most people should oil their machines every 6 months. To keep your sewing machine in good working condition, it is important to oil it regularly. How often you should oil your sewing machine depends on how frequently you use it. If you use your sewing machine daily, you should oil it at least once a week. If you only use it occasionally, you can get away with oiling it every two weeks or so.

On What Places of the Sewing Machine Oil should be applied ?

Proper maintenance of your sewing machine is important to keep it running smoothly and prevent costly repairs down the road. By oiling your machine regularly, you can help ensure that it will provide you with years of trouble-free service. It’s a good idea to apply a light coat of oil to the moving parts of the machine- such as the

Unplug the machine from its power source and remove any attachments, such as the presser foot or needle plate

Needle Bar

Other Things to Keep in mind while Servicing Sewing Machine.

Sewing machines are one of the most commonly used appliances in many households. They are also one of the most delicate and easily damaged appliances. A sewing machine that is not properly maintained can quickly become unusable .

Clean out dust, and old oil – It is also important to clean your sewing machine regularly. This includes dusting off the exterior of the machine as well as cleaning any lint or thread buildup from inside the bobbin case. Most sewing machines come with a special brush that can be used for this purpose. To clean the bobbin case, first remove it from the machine and then use the brush to remove any lint or thread buildup. Once it is clean, replace it and make sure it is firmly in place before using the machine again.

Check timing belt for proper tension and alignment, if the machine has one.If you notice your sewing machine starting to act up or not work as smoothly as it once did, take it in for a tune-up at a sewing machine repair shop

Thoroughly Check all gears that drive the machine motion and make sure they are properly meshed and have no stripped or damaged Component

Tighten any loose gears or screws, and make sure all parts are properly aligned. Lubricate gears if needed.

Check for any excess play between the hook and the hook driver. Excess play will result in missed stitches. Also check that the tension spring is not too loose or too tight. The timing of the hook should also be checked. It should open and close at the correct point in relation to the needle. If it does not, it will cause skipped stitches.

To ensure proper stitch formation, the machine needs to be properly threaded. The thread tension needs to be adjusted so that the thread is neither too loose nor too tight. Loose tension will cause loops on the underside of the fabric while tight tension will break the thread.

Check foot control’s electronic contacts, cord, cord end and look for any cuts in the cord insulation. If the cord is damaged, it needs to be replaced.

Can i use WD 40 to my Sewing Machine ?

Yes ,You can use WD 40 to service your Sewing Machine , After using Wd 40, It’s a good idea to apply a light coat of oil to the moving parts of the machine.

Which Oil Should i Use for my Sewing Machine ?

Use a good quality, light machine oil . Avoid using oils that are too thick as they can gum up the works. Apply a few drops of oil to each moving part, taking care not to over oil as this can damage the machine. Wipe away any excess oil with a clean, dry cloth.

You can use : Liberty Oil can be availed at Amazon

IMPORTANT NOTE :

As with any machinery, it’s important to follow the manufacturer’s recommendations when servicing your sewing machine. Always unplug the machine from its power source before cleaning or performing maintenance. And be sure to refer to your owner’s manual for specific instructions on how to care for your particular model