DIY gathered bell sleeve refashion

How to Sew a Shirt, Sewing for Beginners, Part 1
January 7, 2017
Sewing for Beginners: Sewing a straight line stitch
January 8, 2017


b

This dress is actually a refashion from one of my DIYs! I literally couldn’t find the right fabric or the right dress at the thrift store so I just grabbed my old boxy dress DIY and went for it! I took it in to be more A-line and added the sleeves. I realized after I attached the sleeves and took in the dress a little, it turned out to be kind of summery. Ehhhh, what can you do. Still love it and can’t wait to wear it!

Instructions:
-mark where you want your gathered bell sleeve to start
and measure the length you want the bell to be
–cut just below you mark
measure the opening of the sleeve then double the measurement.
-Cut out 2 rectangles that are the doubled sleeve opening measurement by the length you want the bell sleeve to be.
-Then hem one of long sides of the rectangle
and sew a basting stitch to other long side.
-then gently pull the basting stitch to be the size opening as the sleeve opening.
-sew the side of the bell together to make a tube.
-pull the sleeve through the gathered part of the inside out bell
-pin and sew the 2 openings together
-topstitch the outside of the sleeve just above the seam you just sewed, making sure to sew the inside raw edge or the seam allowance upward into the topstitch creating a flatter gathering.

bellcoll
Instructions:
-mark where you want your gathered bell sleeve to start
and measure the length you want the bell to be
–cut just below you mark
measure the opening of the sleeve then double the measurement.
-Cut out 2 rectangles that are the doubled sleeve opening measurement by the length you want the bell sleeve to be.
-Then hem one of long sides of the rectangle
and sew a basting stitch to other long side.
-then gently pull the basting stitch to be the size opening as the sleeve opening.
-sew the side of the bell together to make a tube.
-pull the sleeve through the gathered part of the inside out bell
-pin and sew the 2 openings together
-topstitch the outside of the sleeve just above the seam you just sewed, making sure to sew the inside raw edge or the seam allowance upward into the topstitch creating a flatter gathering.

dsc06006

Here is the before shot! If you want to know how to make this boxy dress hop over HERE!

img_2123c





Source link

Leave a Reply

Your email address will not be published. Required fields are marked *